RY-125T Hydraulic Automatic Cutting Machine
RY-125T 自動液壓裁剪機
Parameter: 參數：
Model 型號 | RY-125T |
Pressure 壓力 | 125 tons |
Area of Work Platform 模臺面積 | 1250×1450mm |
Power 功率 | 11kw |
Travel 行程 | 220mm |
Distance between work platform and clamping bar 工作臺與夾桿距離 | 40-260mm |
Times of Work 工作效率 | 5-10time/min |
Weight 重量 | about 6000kg |
Structural characteristics: 結構特性：
?Computer control system, touch-screen and simple operation, fast and accurate.
電腦控制系統，觸摸屏，操作簡單，快速準確
?Hydraulic control system absorbs domestic and foreign advanced technology using energy saving low noise devices.
液壓控制系統吸收了國內外先進技術，采用節能降噪裝置
?Dual fuel tanks, four posts with precise self-balancing to ensure the consistance of each cutting depth.
雙油缸，四柱精確自平衡，保證每一切割深度的一致性
?Manual hydraulic cutting operation, press the button once to finish one cycle without any disadvantage of imtermittent cutting many time.
手動液壓切割操作，一次按下按鈕完成一次循環，不存在多次切割的缺點
?Differential cutting design, die quickly descends, when it moves closing to cut mould then changes to automatic slow cutting, which can eliminate the error between upper and lower layer.
特異切割設計，模具快速下降，當接近切割模具時，自動切換為慢速切割，可以消除上下兩層之間的誤差
?Eco-friendly materials such as PET, PP, OPS, EPE, ABS will not have rough edges or uncutting edges. It can avoid some waste powder sticking on the food boxes.
適用PET、PP、OPS、EPE、ABS等環保材料不會有毛邊。它可以避免一些廢粉粘在食品盒上
?Ad Hoc cooled rotary encoder systems and devices make the positioning of knife mold more accurate and stable.
自組合式冷卻旋轉編碼器系統和裝置，使刀模定位更加準確、穩定
?Cutting power and cutting depth controlled by micromatic setting which can randomly switch to the best cutting pressure and depth quickly. Because of the precision of the balance of cutting, it can greatly reduce the wear and tear of the knife mold and the board.
切割功率和切割深度由微動設定控制，可快速隨機切換到*切割壓力和深度。由于切割平衡精度高，大大降低了刀模和板材的磨損
?Self-lubricating system can ensure the precision of the machine and improve the machine durability.
自潤滑系統可以保證機器的精度，提高機器的耐用性
?Can fit for unilateral or bilateral automatic feeding device, which can increase the whole production capacity by two or three times.
可適用于單側或雙側自動送料裝置，可使整個生產能力提高2 - 3倍